What is the rear end gear ratio on 1990 ford mustang gt?

already exists.

Would you like to merge this question into it?

already exists as an alternate of this question.

Would you like to make it the primary and merge this question into it?

exists and is an alternate of .

Open the drivers door and look for an information sticker on the end of the door

that shows the axle code

" M " is the 2.73 Traction Lok ( most likely with the automatic )

" Z " is the 3.08 " " ( most likely with the manual transmission )

( also " E " was a 3.27 Traction Lok and " K " was a 3.55 Traction Lok )
2 people found this useful

What is the rear-end gear ratio on a 2005 mustang GT automatic?

3.31:1 on automatics and 3.55:1 on manual transmission 2005-2008 mustang GT's. In at least 2007, 3.31 gears were standard on a manual transmission but 3.55's were offered as an option. . The Rear Axle Code is on the door sticker... . BG - 3.31 - non-limited slip CD - 3.55 - limited slip. C (MORE)

Is there a different rear end gear ratio in a 2007 Mustang 4.6L GT automatic vs a 2007 4.6L GT Standard shift 5 speed if so what is the ratio for each?

At the moment, my research shows that the GT's come with 3.31 gearsfrom factory. There is an option for Premium GT's with Manualtransmissions to swap the 3.31's with 3.55's. I know the manual trans is rated for better gas mileage, and hadassumed that the auto's had different gearing. However, I've (MORE)

What is the gear ratio of a 1973 Chevy rear end?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the t (MORE)

What is the gear ratio for a 1996 Chevy blazer rear end?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the t (MORE)

What is the rear-end gear ratio on a 1982 Ford Bronco?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the t (MORE)

Are the front and rear end gears the same ratio?

Sometimes, but most of the times first gear is stronger than rear. A 4 wheel drive vehicle must have the same gear ratio in the front and rear differentials including the rim and tire size on all four corners.

What is rear-end gear ratio on a 1991 ford F 250?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the rear end gear ratio on a 1996 silverado?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the t (MORE)

What is the gear ratio for a 1993 Toyota Previa rear end?

After calling my local authorized Toyota Dealer (Parts department), they told me that the gear ratio for my '93 Toyota Previa rear end is 4.30. It may vary, depending on the vin number of your car, so you have to call your local Toyota dealer (parts department) and ask them for the information with (MORE)

What is the rear end gear ratio on a 1993 gm 1500?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

How can you tell the rear end gear ratio?

Simply by jacking both rear wheels off the ground,put it in neutral,handbrake off, and chock the front wheels, and then turn the rear wheel 10 revolutions, and count the number of revolutions the tailshaft makes. For example, if it makes almost 38 revolutions, the diff ratio is 3.78:1. Alternatively (MORE)

Changing gear oil in rear end of 2003 mustang?

well, it may sound like a pain doing this. But you have to pull the rear gear case. I recomend backing all the bolts about 3/4" off, then taking the bottom half off all the way, and with an oil pan ready, just pull (or pry) the case away from the gasket. I strongly recoment changing the rear gasket (MORE)

What is the rear end gear ratio on a 1983 mustang GT with a automatic?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the rear-end gear ratio on a 1994 Ford Bronco xlt?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the rear gear ratio for Ford F100?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

How do you figure out rear end gears ratios?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is rear gear ratio of 2002 mustang GT 5spd?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What gear ratio is your truck rear end?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the t (MORE)

How do you find the gear ratio on a rear end?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the rear end gear ratio in a 1993 Ford f 150?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

How do you identify the gear ratio on a 1996 ford 8.8 rear end?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the rear end gear ratio for a 1999 ford ranger?

Open the drivers door and look for an information sticker on the end of the door . It should show the axle code . It may be a letter and a number , or two numbers . The axle code is used to tell what the gear ratio is and if you have a limited slip . differential - just ask your question again a (MORE)

What is the oem rear gear ratio on a 1990 Chevy c1500?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the axle gear ratio for a 1988 mustang gt 5.0?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the t (MORE)

What is the rear end gear ratio for a 1994 Ford truck?

The tag on the cover, bolted to one of the 10 bolts on a 8.8 rear, should spell it out for you. My Mustang GT tag reads 3L08 88 4B07. The first three numbers on the tag tells me its a 3.08 gear ratio. Assuming you are referring to a F150 with a 8.8 rear, Ford used the 8.8 on a bunch of cars and truc (MORE)

What is the stock Gear ratio for 2003 mustang gt?

hey there! can you remove hte tag on your diff cover oneof two tags tell you the gear ratio and wether its a limited slip or an open carrier usually for a gt mustang would be 3.73 ratio but it changes if automatic or standard trans,....

1964 Ford f100 rear axle gear ratio?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the t (MORE)

What is rear end gear ratio on 2002 avalanche?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the rear end gear ratio for a Toyota Tacoma 4x4?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the rear end gear ratio on a 1988 f 350?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

What is the rear end gear ratio for your 87 Camaro?

There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the (MORE)

Where is the starter located on a 1990 ford mustang gt?

It is located underneath the car. It's on the passenger side in between the oil pan, and the flywheel. It's about the size of a large fountain firework. It weighs about 15 pounds. Make sure you take off the passenger wheel to get to it properly.

What is the gear ratio in 1989 mustang gt 5.0 aod?

I don't know if it is the same but my 1991 Ford Mustang 5.0 LX had 2.73 gears with the 4 speed automatic transmission ( at 137 MPH it was loafing along at 3300 RPM in overdrive ) * I believe the Traction Lok axle codes in a Ford Mustang up to1993 are " M " / 2.73 " Z " / 3.08 " E " / 3.27 " K (MORE)

What years did ford use 3.50 gear ratio in rear ends?

The years 1990 to 1993 ford use 3.50 gears was upgraded with stronger 3.35 gears sets by adding the nickel content. This was to make the gears hard and strong and to make the 2nd and 3rd gears decrease a little to give it more torque to the rear wheels.